Thursday, June 30, 2011

Porsche 997 V-RT Car Edition Turbo Engine Refined Vorsteiner


Take a look at this new car design Porsche 997 V-RT super sport car with new innovation Turbo engine official photos gallery shown below. If you not yet see the Porsche 997 V-RT specs before, read the car press release when the car tuning package and test drive performance report also included. Porsche 911 Turbo was refined by Vorsteiner which make some creative car modification with installing an aerodynamics vehicle body kit and a set of huge luxury alloy wheels. Vorsteiner Porsche 911 V-RT car model features new body kit consisting of larger carbon fiber air intakes exclusive of fog lights as in the Porsche GT2 vehicle version. At the rear view, the tuning specialists installed, presented to buy new car font bumper with a twin-finned carbon fiber rear diffuser for the quad exhaust system.

The Porsche 911 V-RT race car rims are three-piece V-306 20″ fitted with Michelin Pilot Sport PS2 tires for maximum grip at the race track as well as the public roads. The Porsche 911 V-RT engine is 3.6 litre twin-turbocharged flat-six with 480PS (353 kW) and 620Nm of torque. It catapults the car 100 km/h in 3.7 seconds (manual) and the top speed is 310 km/h (193 mph). There is an optional Sports Chrono overboost package, which increases torque to 680 Nm (500 lb-ft). More information, visit Porsche official website.


Porsche 997 V-RT Car Edition Turbo Engine Refined Vorsteiner

Bmw 635

BMW is a company with a long tradition of participation in motorsports. In the 1970’s, the CS and CSi version of the BMW 3-series had found success as lightweight racers on several different circuits. In the 1980’s, BMW wanted to continue the performance concept with a slightly larger coupe that would be a good fit between their midsize sedan, the 5-series, and their large car, the 7-series. The E24 chassis was born, and with it the 6-series sedans. One of the most powerful versions of this vehicle was the 1989 BMW 635 CSi.
The BMW 635 was visually quite distinctive. The front of the car jutted out over the bumper, giving the grille and headlights a reverse rake and lending the vehicle the nickname of ‘the shark’. The car’s rear deck sloped down to a flat trunk offset by a horizontal lip wing. The car also shared the same circular quad headlights that had been a BMW trademark for decades. The big coupe was powered by the 3.5 liter M30 engine, which in the 635 CSi produced 215 horsepower and 232 lb-feet of torque – quite impressive by the standards of the day. The 635 CSi found direct competition in the Porsche 928, which was powered by a 300 horsepower V8. This gave it superior performance to the BMW, but the lack of anything more than vestigial rear seating put it behind the 6-series in terms of interior comfort. Leather seats, dual-zone climate control and a well-developed suspension helped make the ride of the 635 CSi a fine balance between sport and performance.
This is not to say that the 635 CSi was a slouch in the performance department. The coupe could reach 60 miles per hour in 8.4 seconds and had a top speed of 135 miles per hour. A trailing arm rear suspension kept the car stable during high-speed cornering, despite the significant 3300 lb weight of the car. The 635 CSi could be had with a 4-speed automatic or 5-speed manual transmission. The BMW 635 CSi continued on the tradition of the 3-series on the race track, winning the 24 hours of Spa-Francrochamps and several European Championship races during the campaign of Schnitzer Team BMW. The driver was Gerhard Berger, who would go on to become BMW’s Director of Motorsport.
1989 was the final year for the 635 CSi, and it was considered the best year from an aesthetics perspective, at least in North America. American crash regulations had historically been stricter than those found in Europe, and as a result many of the European cars that had been imported had also been refitted with ugly steel bumpers which stuck out like a sore thumb in the front and the rear. For 1989, BMW was able to fit the 6-series with reinforced bumpers that also molded into the lines of the vehicle, greatly improving the overall look.
When production ended in April in 1989, BMW decided that the next iteration of their coupe would be much larger, with an emphasis on luxury instead of sport. The 8-series would take its place in the BMW model lineup, but it would have a much shorter run than the 6-series, as buyers were disenfranchised with the lackluster performance offered at such a high price tag. The 8-series was even heavier than the 6, and despite being equipped with a V8 and an optional V12 engine, there was no mistaking it for a serious performance vehicle. BMW put the coupe out of its misery after only a few years of production, waiting until the mid-2000’s to re-introduce a large coupe. This time, they used the 6-series moniker again and found much greater success.
You might also like:

Saturday, June 25, 2011

lamborghini Murcielago

lamborghini Murcielago
lamborghini Murcielago
lamborghini Murcielago
is a high-performance two-door, two-seat sports car that was produced by Italian automaker Lamborghi

Sunday, June 5, 2011

Ferrari Enzo crash

Thursday, December 8, 2011

Regulation exhaust emissions become increasingly stringent in Europe a new challenge for the sports car manufacturer. One of them is a Ferrari. The solution adopted was the sports car manufacturer, thrusting hybrid technology.

After Ferrari California "greening" at the Paris Motor Show 2010, the latest generation of the next turn Enzo will be planted with environmentally friendly technology. This was revealed by direct boss Horse Jingkrak manufacturer, Luca di Montezemolo told Autoweek.


Luca Montezemolo said, Enzo will still get the best performance, as well as fuel consumption more efficient with new technology. Enzo expected to present the latest model in 2012.

"This car will bring all our best advantage to produce the greatest performance, as well as to reduce fuey